一、概述Outline

QJ(D/S)RN型精小型氣動螺紋O型切斷球閥是一種轉角為90°的旋轉類控制閥。它由氣動活塞式執行機構和O型球閥組成，閥芯采用圓柱形通孔球體。
該產品以壓縮空氣為動力源，接受集散控制系統(DCS)，可編程控制器(PLC)等開關信號，通過電磁閥可實現對閥門快速位式控制。
該產品采用直通型鑄造閥體，球面經特殊工藝加工和硬化處理，使其表面光滑耐磨，具有壽命長、結構緊湊、動作可靠、流通能力大、流阻系數小、安裝方便及良好的切斷性能等特點。產品廣泛應用于造紙、石化、冶金、航天、食品、醫藥、水處理等行業，特別適用于高黏度和含有纖維介質的工藝控制。
氣動活塞式執行機構可分為單作用和雙作用兩種。雙作用使用在失電或失氣時，閥門處于失電或失氣時的位置，以確保繼續生產。單作用在失電或失氣時，閥門處于原始極限位置(全開或全閉)，以確保生產過程處于**位置。

QJ (D / S) RN-type O-intensive small pneumatic screw off ball valve angle of 90 ° is a rotary type control valve. It consists of pneumatic piston actuator and the composition of O-type ball valve, valve core sphere using cylindrical hole.
The product is compressed air as power source, accept the distributed control system (DCS), programmable logic controller (PLC) such as switching signals, can be realized through the solenoid valve control valve fast bits.
The product is through casting body, spherical processed by special technology and hardened, making it a smooth surface wear, with a long life, compact structure, reliability, flow capacity, flow resistance coefficient is small, easy to install and good cut-off performance characteristics. Products are widely used in papermaking, petrochemical, metallurgy, aerospace, food, medicine, water treatment and other industries, particularly for high viscosity and contain fiber media process control.
Pneumatic piston actuators can be divided into single and double acting two. Dual role in the loss of power or loss of use of gas when the valve is out of power or loss of gas when the position to ensure continued production. Single in the loss of power or loss of gas when the valve is in the original extreme position (open or closed) to ensure that the production process in a secure location.

 二、主要技術參數和技術指標Main technical parameters and technical indicators

1、主要技術參數Main technical parameters

公稱通徑mm		8	10	15	20	25	32	40	50
公稱壓力MPa		1.6
額定行程 Rated travel		90°
固有流量特性 Inherent flow characteristic		快開特性Quick-opening feature
閥體材質 Body material		ZG230~450、ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti
閥座材質 Seat Material		PTFE/PPL;
閥芯材質 Spool material		ZG230~450、ZG1Cr18Ni9Ti、ZG1Cr18Ni12Mo2Ti
介質溫度℃ Medium temperature ℃		-40~+80、-40~+350
氣源壓力Mpa		0.4~0.6
電磁閥Solenoid valve	電源Power supply	220V AC、24V DC
	防爆等級Explosion levels	普通型、防爆型dIIBT4(dIICT4)、本安型 Common type, explosion-proof dIIBT4 (dIICT4), intrinsically safe
連接形式 Connection form		內螺紋G1/4”	3/8”	1/2”	3/4”	1”	1 1/4”	1 1/2”	2”
泄漏量 Leakage		VI級
執行機構接口 Actuator interfaces		1/8”G NAMUR1/4”G

 2、執行機構扭轉及動作時間Action to reverse the actuator and the time

執行機構型號AGT		63*90	75*90	83*90	92*90	110*90	118*90	127*90	160*90	210*90
扭矩N.m	400KPa	23.2	40.0.	56.0	77.6	112.8	168.0	220.0	440.0	948.0
	500KPa	29.0	50.0	70.0	97.0	141.0	210.0	275.0	550.0	1185.0
動作時間(S)		0.241	0.333	0.429	0.444	0.461	0.60	0.857	1.62	3.33

注：1、雙作用執行機構在75%負載情況下的動作時間   2、縮短動作時間可允許非標配置

Note: 1, double-acting actuators at 75% load case, the action time of 2 to shorten the operating time to allow non-standard configuration

三、外形尺寸Dimensions

公稱通徑(mm)		外形連接尺寸External Connection Dimension
DN	in	d	L	G	L1	L2	D	L3	C	L0	H
15	1/2	15	67	1/2”	67	85	34	175	22	140/178	62/75
20	3/4	20	82	3/4”	82	100	50.5	190	28	140/178	62/75
25	1	25	91	I”	91	115	50.5	200	33	140/214	62/91
32	I 1/4	32	108	I 1/4’’	108	130	50.5	230	40	164/214	75/91
40	1 1/2	40	129	I 1/2’’	129	150	50.5			164/246	75/101
50	2	50	147	2’’	147	180	64			190/295	91/112
65	2 1/2	65	186	2 1/2’’	186	230	77.5			210/340	101/127
80	3	80	204	3’’	206	260	91			247/398	112/139

四、可配附件Available Accessories

電磁閥、手輪機構、閥位開關、空氣過濾減壓器等。

Solenoid valve, hand wheel, valve position switch, air filter regulator and so on